English   /   Deutsch
  • Feusi AG
  • Schwerzistrasse 12CH-8807 Freienbach
    +41 (0)55 415 88 00info@feusi.ag

News

New 5-axis machining center Hermle C 400 U with 14-fold pallet changer
April 2018

Our newest 5-axis machining center Hermle C 400 U has arrived.
With this machine we are able to machine the most demanding milled parts simultaneously 24 hours a day with 5 axes. The machine is equipped with a pallet magazine with 14 pallet slots for the workpieces and a tool magazine with 126 slots.
We have equipped this powerful machine with practically all the options offered by today's state of the art technology and can produce parts with a size of 850 x 700 x 500 mm unmanned.


New addition to our machinery
June 2017

We are happy to announce the following addition to our machinery:

AXA VHC 3 – XTS50

  • Double faced head 90°
  • Dividing attachment
  • 2 integrated roundtables Ø 850
  • X=3000 / Y=700 / Z=850
  • Initial operation: September 2017


New additions to our machinery
August 2016

We are doing the biggest single investment into our infrastructure since incorporation of Feusi AG.

This allows us to be even more modern and efficient for you.

Therefore by september our machinery will be expanded with three new Hermle 5-axis machining centers:

  • C250 U - Travel range X-Y-Z / 600–550–450 mm
  • C250 U with automation (8 paletts) - Travel range X-Y-Z / 600–550–450 mm
  • C400 - Travel range X-Y-Z / 850–700–500 mm

New web presence
September 2015

You are surfing our new website. Have a good read! We look forward to hearing from you.


Okuma LU 4000 EX 2SC
May 2015

Okuma LU 4000 EX 2SC
Turning range Ø 695 x 1250 mm
Dual turrets


Our apprentice training department is expanded
February 2015

Our apprentice training department is expanded with a 3-axis machining center (EMCO Concept MILL 250)
Travel range X = 350, Y = 250, Z = 300 mm


Certification
certification 2014

On 11/3/2014, Feusi AG was successfully recertified according to ISO 9001:2008.
Initial certification as of 11/29/1995


Apprentices
Apprentices 2014

On August 4, two new apprentices started their training at Feusi AG. The new employees will be trained as multi-skilled mechanics.
The whole Feusi team wishes them a good start into professional life.


Hermle C 42 U MT
September 2014

Hermle C 42 U MT
Travel range X = 800, Y = 800, Z = 550 mm
We are already looking forward to this highly dynamic machining center.
With the C 42 we can simultaneously process 1400 kg of heavy work pieces on 5 axes.
Only two machines are currently in operation in Switzerland.


Okuma LB 4000 EX II
October 2014

Okuma LB 4000 EX II
Turning range Ø 670 x 1500 mm


Okuma LB3000
May 2014

Okuma LB3000
Turning range Ø 580 x 1000 mm
The machine has been in operation for 2 months already. Our employees are very satisfied with new controls. Until this day, we had Fanuc controls on Puma lathes.


New Contura G2 10/12/6 Zeiss measuring machine with Vast XT Gold
July 2013

Our latest measuring machine has arrived.


New AXA VPC 45 U universal portal machining center
February 2013

Our latest machine has arrived and is being commissioned.
The machine is equipped with a rotary table and a swivel head that allows for a five-sided, simultaneous machining and is therefore ideal for impeller / bladed disk machining.


New Hermle C 22 U 5-axis machining center with 11-position pallet changer
December 2012

Our latest Hermle C 22 U 5-axis machining center has arrived.
With this machine, we are able to simultaneously process even the most demanding 5-axis milled parts 24 hours a day. The installation is equipped with a tray feeder with 11 pallet slots for work pieces and has a tool magazine of 120 slots.
We have equipped this powerful machine with virtually all options offered by the current state of the art.


New Hermle C 22 U 5-axis machining center
March 2012

Our new Hermle C 22 U 5-axis machining center has arrived.
With this machine, we are able to simultaneously process even the most demanding 5-axis milled parts.
We have equipped this powerful machine with virtually all options offered by the current state of the art.


New programming system
February 2012

This year, we bought a new programming system by OPEN MIND. Thanks to hyperMILL we are able to simultaneously produce highly complex parts on multiple axes. This allows us to mill work pieces such as e.g. closed impellers – something that only a small number of companies in the Switzerland can offer.


New lathes
April 2011

Two new Daewoo Puma 2100LS lathes with counter spindle have arrived and have been in use since April. These are the two first machines of this kind in Switzerland, and both of them have a work area of Ø 480 x 760 mm. Using these machines, we are able to finish work pieces, off-the-shelf or sawn, on both sides in a single production step.